Regular Duty is designed for low duty packaging applications and is made of low carbon, low manganese cold rolled steel. It is a combination of the fine surface and controlled physical properties of cold-rolled strapping with ductility and excellent shock resistance.
 
 
 
 

Cold rolling in regular duty gives steel greater strength, permits much closer control of thickness and provides a smooth surface

Chemical Regular Duty
C 0.08-0.12%
Mg 0.30-0.45%
P 0.020% Max
S 0.02% Max
Al 0.05% Max
Si 0.10% Max
S.no size Width
In mm
Thickness
In mm
Minumum Maximum Elongation on 152.4mm Gauge Length Min - Max Bends
        UTS
Kg/mm2
Min
Break Load in Kgs Uts
Kg/mm2
Min
Break Load in Kgs    
1 1215 12.7 0.38 77 372 95 458 0.5% - 4% 2 (I T)
2 5820 15.88 0.51 77 624 95 769 0.5% - 4% 2 (I T)
3 5823 15.88 0.58 77 709 95 875 0.5% - 4% 2 (I T)
4 3422 19.05 0.55 77 807 95 995 0.5% - 4% 2 (I T)
5 3425 19.05 0.64 77 938 95 1158 0.5% - 4% 2 (I T)
6 1431 31.75 0.79 77 1931 95 2383 0.5% - 4% 2 (I T)
Width Tolerance:      +/- 0.13mm
Thickness Tolerance: +0.05mm, -0.03mm
The strapping is oscillated uniformly and tightly across the 2-1/2" (63.5 mm) width of the coil. Internal Diameter - 406mm
Each layer of strap is wound directly one above the other so that the width of the strapping is the width of the coil. Internal Diameter - 200mm